中国特色社会主义事业发展布局的创新与发展

十八大首次将经济、政治、文化、社会和生态五大建设并列,强调“五位一体”建设中国特色社会主义。由此,中国特色社会主义发展布局历经四个阶段,即：“一个中心,两个基本点”的战略布局,“三位一体”发展布局,“四位一体”发展布局,“五位一体”发展布局。“五位一体”总体布局是一个相互联系、相互协调、相互促进、相辅相成的有机整体,对于开创中国特色社会主义事业新局面意义重大,为到本世纪中叶基本实现社会主义现代化,提供了有力支撑。     

月壤参数对月面着陆气囊缓冲性能的影响

为研究月壤参数对气囊缓冲性能的影响,根据“嫦娥三号”的着陆工况设计了月面着陆气囊,并基于可压溃泡沫模型建立了考虑月壤特性的气囊缓冲动力学模型。对不同月壤下气囊的缓冲过程进行分析,发现月壤越软有效载荷冲击加速度越小,但气囊会陷入月壤中,不利于对外排气,影响其缓冲效果。因此,采用气囊峰值压力、有效载荷最大加速度和最大下落高度3个指标对气囊缓冲性能进行综合评价,定量研究了月壤参数的影响规律。结果表明:月壤密度、剪切模量及屈服参数a₀和a₁对缓冲性能的影响较大,且对前两个指标为正影响,对后一个指标为负影响。进一步研究发现,这4个月壤参数与3个缓冲性能指标之间〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCZX.TIF;%129%129〗听语音 聊科研与作者互动 均为指数函数关系。     

Investigation of normal,lateral, and oblique impact of microscale projectiles into unidirectional glass/epoxy composites

Spacesuits and spacecraft must endure high velocity impacts from micrometeoroids. This work considers the impact of 100 μm diameter projectiles into composite targets at velocities from 0.5 km/s to 2 km/s. This work begins by presenting an energy-based theoretical model relating depth of penetration (DoP) and impact force to impact velocity, characteristic time, and threshold velocity and force. Next, this work compares numerical simulations of normal impact on composites to the theoretical model. Numerical simulations are conducted with LS-DYNA and the well-known composite model, MAT-162. The numerical models consider unidirectional S2-glass fiber reinforced SC-15 epoxy composite laminates. The numerical model shows good correlation with the theoretical model. The numerical model also investigates lateral impact, parallel to the fiber direction, and oblique impact at angles from 30° to 82.5°. This work decomposes oblique impact into normal and lateral components, and compares them with normal and lateral impact results. The results show good correlation of the normal component of oblique results with the theoretical model. This numerical and theoretical study focuses on DoP, velocity, and penetration resistance force as functions of time. The theoretical model and numerical simulations are used to determine new DoP parameters: characteristic time of depth of penetration and threshold impact velocity. These models are a first step in developing the capability to predict DoP for oblique, microscale, high-speed impact on composite materials.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

雷达信号仿真中箔条干扰回波模型研究

雷达信号仿真是抗干扰算法研究和验证的有效措施。针对箔条干扰随机信号模型难以满足高精度仿真的需要,本文在分析和总结箔条干扰散射特性和运动特性的基础上,对箔条干扰回波模型进行了更深入和精细化的研究。在Matlab平台上通过编程优化克服了复杂计算的问题,并获得了较好的模拟效果。仿真实验表明,该模型可为精确研究箔条干扰提供数据支持。     

空投设备气囊缓冲系统的缓冲特性分析与匹配方法

采用解析分析法,根据排气口流量方程和载荷运动方程建立了无量纲的空投设备气囊缓冲过程数学模型,并根据此模型构造了气囊的匹配设计图。讨论了排气口面积、气囊高度、着陆初速度、载荷质量、气囊底面积及排气口开启压力等参数对气囊缓冲性能的影响,提出了空投设备气囊缓冲系统的参数匹配设计方法,为空投设备气囊缓冲系统的匹配设计提供了技术支持。     

液体火箭发动机气液同轴式喷嘴混合特性实验研究

本文通过实验研究了液体火箭发动机气液同轴离心式喷嘴的混合特性。利用两相探针技术,测量了喷嘴下游喷雾流场中气液流强和混合比分布,考察了喷嘴缩进比和气液喷注压降等参数对混合特性的影响。结果表明,气液同轴离心式喷嘴的缩进比对喷嘴混合特性有较大影响,增大缩进比将导致更窄的气液流强分布和更均匀的混合,而改变气液喷注压降将导致不同的流强和混合比分布规律。     

制导精度对弹道导弹动能拦截效果的影响分析

本文首先从碰撞几何关系角度建立了直接碰撞毁伤来袭弹头内所有子弹头的碰撞毁伤模型,并得出了碰撞弹坑需求;其次从碰撞能量角度建立了直接碰撞产生的动能与对弹头造成侵彻弹坑的关系。通过仿真计算,得到了碰撞精度与弹目交汇速度、KKV的质量和体积之间的关系,可为KKV的设计提供参考。     

非法移民对边境安全稳定的影响分析

边境安全作为国家安全或者国土安全的重要方面，越来越多地受到各种非传统安全因素的威胁和挑战，其中，非法移民问题就是一个不可忽视的因素。非法移民的界定涵盖了“偷运移民”和“贩运人口”两种犯罪形式，并分别从结构性维度和战略性维度分析了非法移民对输出国（或地区）、输入国（或地区）和途经国（或地区）边境安全稳定的影响。     

电扫偶极子相控阵天线的空域极化特性分析

推导了偶极子线性阵列和平面相控阵天线在空域波束电扫时辐射场的极化特性,建立了数学模型。计算结果和仿真分析表明:偶极子相控阵天线辐射场在空域扫描各个波位的极化特性并不一致,是具有一定差异的,当待测目标的方向偏离天线电轴方向时,所接收到的电波极化状态也会随偏离电轴的方向和仰角而改变。该结论对于现代电子战中相控阵天线系统的精确建模与仿真具有重要意义,对于研究和利用天线的极化特性进行雷达极化抗干扰技术是非常必要的。